Wiki Detay | wiki workcube

When finalizing the production, the actual consumption and losses of the product are updated in the table automatically created from the production order. You can automatically create a production exit voucher, consumption voucher and inter-warehouse delivery note from the production result.

If special settings have been made for a page, the xml settings of the page are created in Workcube. Depending on the XML settings, there may be differences such as fetching data, calculating, and displaying results on the page. You can check the xml settings when you want to analyze the page or understand how it works. It is the most important rule set in shaping the page. XML Settings of each page are on its own page.

Path: You can access the XML Settings by following the Control Panel > System > Page Settings path on the current page.

Adding and Updating Production Result

Cost of Consumables and Waste Products Can Be Changed:
When Yes is selected, the costs of consumables and waste products can be changed manually.
Station Can be Changed:
When Yes is selected, the station information of the production can be changed.
2.Work with Units:
When Yes is selected, it is enabled to work with the 2nd units defined in the product detail.
Spec ID Display:
When Yes is selected, the spec ID field opens and can be displayed.
Spec Name Display:
When Yes is selected, the spec name field opens and can be displayed.
2.Show Description Field:
When Yes is selected, 2 description fields are opened as an additional column where explanations for consumables and wastages can be entered.
Quantities Can Be Changed During Disassembly:
Allows the quantity to be changed while disassembly operations are performed.
Stock Control Spec. Do:
When Yes is selected, the stock control of the product is carried out on a spec basis. It checks the stock of not only the product but also the product's spec. Since operation information cannot be sent in product trees with only operations, it creates duplicate spec records. It is recommended to choose carefully in operational production.
Show Reflected Costs:
Shows the cost reflected from cost centers as a result of production.
Show Labor Costs:
Shows labor costs reflected from cost accounting.
Show Total Cost:
Related It shows the total cost of the product.
The Result Amount May Be More Than the Production Amount:
When Yes is selected, the production result quantity may be more than the relevant production order quantity.
Show Combine on Shipment:
When Yes is selected, boxes with SB (Combine on Shipment) will open next to the consumables. Indicates that the relevant consumables will be combined in shipment.
Create Automatic Results for Operations for which No Result Has Been Entered:
When Yes is selected, if no results have been entered for the operations related to the production order, when the production result is saved, results equal to the total amount will be entered into the operations.
a*b*h Show:
When Yes is selected, a*b*h will appear in the consumption and waste lines. column opens and the a*b*h information entered in the unit field in the product detail is displayed.
Add Product from Barcode and Serial Number:
When Yes is selected, it allows the product to be added by entering the barcode and serial number.
Allow the Barcode Column:
Barcode information of the product. is shown.
Show the Waste Column for the Produced Product:
A waste column is opened in the produced product line and the number of wastages from the produced product can be written in this field.
System 2. Let the Unit Cost According to Currency:
System 2. with costs according to the currency. is calculated.
Consumable Lines Also Come as Waste:
Consumable lines also come as waste lines.
No Update If Receipt Has Been Created:
If production result and consumption receipts have been created, it does not allow the production result to be updated.
In the Delete Process. Check Received Shipment Notes:
When Yes is selected, the production result is deleted and a warning is given if there are received delivery notes.
Lot Number Can Be Changed:
When Yes is selected, it allows the lot numbers of the products to be changed.
Check Quality Control Information When Creating a Stock Receipt:
If the product's quality control is monitored and quality control parameters are entered in the product detail, it does not allow the creation of a stock receipt without making a quality control entry. In order to record a stock receipt, a quality control entry must be made for the product produced as a result of the relevant production and the approval process must be carried out at the stage of the quality control process.
Make Stock Movement Based on Lot Number:
Enables stock movement to be made on the basis of lot number.
Consumable Amount According to Material Requirement. Let it be calculated:
We produced 80 units out of 100 production orders and increased their expenses from the calculated expenses. Instead of using 80 consumables out of 100, we used 85 consumables. If we say yes, it will bring the remaining consumable amount, that is, 15 pieces, but if we say no, it will bring 20 consumables.
Consumption Receipt Transaction Category ID:
It creates a consumable voucher in the transaction category whose ID is written.
Waste Receipt Transaction Category ID:
It creates a wastage voucher in the transaction category whose ID is written.
Inter-Warehouse Shipment Transaction Category ID:
Creates inter-warehouse delivery note in the transaction category whose ID is written.
Production Release Slip Transaction Category ID:
Production release slip in the transaction category whose ID is written.
Production Entry Slip (Disassembly) Transaction Category ID:
Creates a production entry (disassembly) voucher in the transaction category whose ID is written.
Perform Zero Stock Control According to Document Date:
When Yes is selected, it performs stock control according to the date of the document. If no is selected, it performs stock control according to the date before the document is created and gives an insufficient stock warning if there is no stock before the document date, even if you actually have stock on the document date.
Consumables and Wastes Arrive Depending on the Sequence Number in the Tree:
Consumables and wastes are provided according to the sequence number in the tree.
Manual Cost. Show:
When Yes is selected, boxes with M (Cost) written next to the Currency will open for consumption and waste.
How Many Digits Should Come After the Comma in the Quantity?:
How many digits should come after the comma in the quantity is selected.
Should the Consumable Quantity be Automatically Updated According to the Quantity in the Production Result?:
If No is selected, the quantity in the production result will be updated by simply pressing the button, otherwise Otherwise, it does not calculate consumption. If Yes is selected, it will continue to operate in its standard state, and the consumables will be updated automatically when the amount changes.
Entry Warehouse Location Authority:
If all locations are selected, all locations will appear and can be selected, regardless of authorization checks.
Exit Warehouse Location Authority:
If all locations are selected, the authority All locations appear and can be selected, regardless of authorization controls.
Production Warehouse Location Authorization:
If all locations are selected, all locations appear and can be selected, regardless of authorization controls.
Show Specific Gravity?:
The specific gravity lever is opened and is displayed.
Show Job in Rows?:
A job column is opened in the production result row and the production result can be linked to a job.
Show Expiration Date in Rows?:
Expiration date column is opened in Consumables and Waste. is displayed.

Feedback

Did you find this content helpful?

Please Write Your Feedback!

Name*

Last Name*

Email *

About Workcube Objects

Record was not found

Related Contents

2.3.2.7. Production Results

While finalizing the production, the actual consumption and losses of the product are updated in the table automatically created from the production order. You can automatically create a production exit voucher, consumption voucher and inter-warehouse delivery note from the production result.

More

2.3.3.1. Production XML Settings

Product production highlights value-increasing activities carried out on a physical asset. It is the process of transforming raw materials or semi-finished products into final products by making value-increasing changes. Before commissioning the production module, XML settings must be made to determine how the screens will work.

More